Print Preview
Print Project
-
- About an hour
Beginner
You're new to the skills necessary to complete this project, or maybe you've tried them just once or twice before.
light pink rose hoop bouquet
Prices may vary instore and online.
| Step 1 |
Lay the metal hoop on a table and position a piece of 12" x 9" felt horizontally under the bottom curve. Fold the felt in half with the metal hoop inside the fold. Use a pencil to draw the shape of a crescent along the hoop. TIP: This felt piece will provide a base to glue flowers. |
| Step 2 |
Open the felt fold and set the hoop aside. Re-fold the felt and cut out the crescent shape. |
| Step 3 |
Place the hoop back between layers of the felt crescent and hot glue the felt closed over the hoop both along the hoop and the straight edge. |
| Step 4 |
Cut the stems off of the rose bush with wire cutters. |
| Step 5 |
Lay out a plan of how you want your hoop bouquet to look. Establish where the larger roses will be placed. TIP: Before you hot glue the roses to the felt you will need to trim them to the end of the flower where the stem meets the blossom. |
| Step 6 |
Hot glue the larger rose blossoms in place. Fill in the areas around them with the smaller rose blossoms and buds. TIP: It is fine if the flowers sit at different angles. This is what makes the arrangement look more natural. |
| Step 7 |
To finish the hoop bouquet, fill in with the Baby’s Breath and greenery around the edges. Cut Baby’s Breath in sections, add a little hot glue on the ends and push it into the arrangement where you see there is a hole exposing the felt. TIP: Fill in arrangement until no felt is exposed. Share your project photos with #MakeItWithMichaels |
Supplies
Materials
Materials
https://devtest.canada.michaels.com/on/demandware.store/Sites-MichaelsCA-Site/en_CA/Product-Show?pid=B_84638
-
876270947You’ll Need: 1Item # 10192723$0.59ea.- Color: Antique White
- Size: 9" x 12"
- Color: Antique White
- Size: 9" x 12"
- Color: Antique White
- Size: 9" x 12"
Products
Tools
Tools
https://devtest.canada.michaels.com/on/demandware.store/Sites-MichaelsCA-Site/en_CA/Product-Show?pid=10192723
Products
You’ll Also Need
- 1 - Ashland® Floral Bush – Pink/Beauty Cabbage Rose Assorted (sku 10535403)
- 1 - Ashland® Flower Market Bush – White/Pink Baby's Breath (sku 10534521)
Instructions
| Step 1 |
Lay the metal hoop on a table and position a piece of 12" x 9" felt horizontally under the bottom curve. Fold the felt in half with the metal hoop inside the fold. Use a pencil to draw the shape of a crescent along the hoop. TIP: This felt piece will provide a base to glue flowers. |
| Step 2 |
Open the felt fold and set the hoop aside. Re-fold the felt and cut out the crescent shape. |
| Step 3 |
Place the hoop back between layers of the felt crescent and hot glue the felt closed over the hoop both along the hoop and the straight edge. |
| Step 4 |
Cut the stems off of the rose bush with wire cutters. |
| Step 5 |
Lay out a plan of how you want your hoop bouquet to look. Establish where the larger roses will be placed. TIP: Before you hot glue the roses to the felt you will need to trim them to the end of the flower where the stem meets the blossom. |
| Step 6 |
Hot glue the larger rose blossoms in place. Fill in the areas around them with the smaller rose blossoms and buds. TIP: It is fine if the flowers sit at different angles. This is what makes the arrangement look more natural. |
| Step 7 |
To finish the hoop bouquet, fill in with the Baby’s Breath and greenery around the edges. Cut Baby’s Breath in sections, add a little hot glue on the ends and push it into the arrangement where you see there is a hole exposing the felt. TIP: Fill in arrangement until no felt is exposed. Share your project photos with #MakeItWithMichaels |